ATF AUTOS LLC
Searching Inventory...

    2006 Komatsu PC200-7LC

    2006 Komatsu PC200-7LC

    Hours: 7032
    Cab with heat and A/C9’6″ stick32″ padsGP bkt., 1000 hr service completedFast, Strong, Tight machine

    ENGINE
    Model Komatsu SAA6D102E-2
    Type Water-cooled, 4-cycle, direct injection
    Aspiration Turbocharged and air-air aftercooling
    Number of cylinders 6
    Bore 102 mm 4.02″
    Stroke120 mm 4.72″
    Piston displacement 5.88 ltr 359 in3
    Power rating (*SAE J1995 conditions)
    *Gross 150 HP 111.9 kW @ 1950 rpm
    Flywheel 143 HP 106.6 kW @ 1950 rpm
    GovernorAll-speed control, mechanical
    Meets 2001 EPA emission regulations, EPA Tier 2 emission ready.
    HYDRAULICS
    Type HydrauMind (Hydraulic Mechanical Intelligence New Design)
    system, closed-center system with load sensing valves and
    pressure compensated valves
    Number of selectable working modes 4
    Main pump:
    Type Variable displacement piston type
    Pumps for Boom, arm, bucket, swing, and travel circuits
    Maximum flow 428 ltr/min 113 U.Sgal/min
    Supply for control circuit Self-reducing valve
    Hydraulic motors:
    Travel2 x axial piston motor with parking brake
    Swing 1 x axial piston motor with swing holding brake
    Relief valve setting:
    Implement circuits 37.3 MPa 380 kgf/cm2 5,400 psi
    Travel circuit 37.3 MPa 380 kgf/cm2 5,400 psi
    Swing circuit 28.9 MPa 290 kgf/cm2 4,125 psi
    Pilot circuit .3.2 MPa 33 kgf/cm2 470 psi
    Hydraulic cylinders:
    (Number of cylinders – bore x stroke x rod diameter)
    Boom 2 –130 mm x 1334 mm x 90 mm 5.1″ x 52.5″ x 3.5″
    Arm 1 –135 mm x 1490 mm x 95 mm 5.3″ x 58.7″ x 3.7″
    Bucket: 1 –115 mm x 1120 mm x 80 mm 4.5″ x 44.1″ x 3.2″
    DRIVES AND BRAKES
    Steering control Two levers with pedals
    Drive methodHydrostatic
    Maximum drawbar pull 178 kN 18200 kg 40,120 lb
    Gradeability 70%, 35°
    Maximum travel speed: High 5.5 km/h 3.4 mph
    (Auto-Shift) Mid 4.1 km/h 2.5 mph
    Low 3.0 km/h 1.9 mph
    Service brake Hydraulic lock
    Parking brakeMechanical disc brake
    SWING SYSTEM
    Drive methodHydrostatic
    Swing reduction Planetary gear
    Swing circle lubrication Grease-bathed
    Service brake Hydraulic lock
    Holding brake/Swing lock Mechanical disc brake
    Swing speed12.4 rpm
    UNDERCARRIAGE
    Center frame X-frame
    Track frame Box-section
    Seal of track Sealed track
    Track adjuster Hydraulic
    Number of shoes (each side): 45
    Number of carrier rollers 2 each side
    Number of track rollers (each side): 7
    COOLANT AND LUBRICANT
    CAPACITY (REFILLING)
    Fuel tank 400 ltr 105.7 U.Sgal
    Coolant22.4 ltr 5.9 U.Sgal
    Engine 24.0 ltr 6.3 U.Sgal
    Final drive, each side 4.5 ltr 1.2 U.Sgal
    Swing drive6.6 ltr 1.7 U.Sgal
    Hydraulic tank 143 ltr 37.8 U.Sgal
    OPERATING WEIGHT (APPROXIMATE)
    Operating weight including 5700 mm 18’8″ one-piece boom,
    2925 mm 9’7″ arm, SAE heaped 0.80 m3 1.05 yd3 backhoe bucket

$53,500